For an unobstructed view of the road or when driving a jeep at night, you require to mount the brightest LED light bar. These light bars have a long illumination distance ensuring that you see what the road well. Additionally, avoiding hitting anything or entering a ditch.
No matter where you are driving whether off-road or tarmacked road then you are sure that with the jeep light bar driving becomes easy. Therefore, if you are like driving your Jeep at night, then you ought to read this article to know about the best jeep light bar.
Features to Consider When Choosing Jeep Light Bars
When planning to fit your Jeep Wrangler with a lighting system, there are factors that you need to put in place. Although the Jeep Light performs almost the same, they differ in many aspects.
The light bars come in different lengths like 4" LED light Pod, 10" LED light bar, 40" LED light bar etc. Different inches come with a different number of LED chips giving different intensities of light. You should evaluate the size of Your Jeep's lamp holder, and the strength of light you want. The length of a light bar also stands out as the main factor if at all you want to fix auxiliary lights to your Jeep Wrangler.
The Beam Angle
The beam angle determines the area illumination width and depth. It is good to always go for a Jeep Light bar with a wide Beam angle if you want deeper penetration. A wider Beam angle also allows you to have a clear view while on off-road driving
The lumens determine the amount of visible human light a light barcan output. Many lightbars are rated using the maximum raw lumens they can output, but you need to convert them to effective lumens by multiplying the indicated lumens by 0.8. the effective lumens give the actual light output. The higher the number of lumens, the better the visible human light that you can experience. Always go for a light bar with a considerable amount of lumens.
Most manufacturers use IP (Ingress Protection) codes to indicate weather resistance capabilities. The IP number always come in pairs where the first number indicates resistance to dust while the second number indicates resistance to water. You should go for a light bar with a rating that is dust and water-resistant. For instance, IP67 means the light bar is dust and water-resistant.
The Operating Voltage
Some of the LED light bars run on a voltage of 13.8 Direct Current. Your Jeep can light that without any modification of the wiring. Always go for the LED lights that fall in the range between 12V, 24V and 48V. Do not go for the Light bars that will require modification of your Jeep lighting wiring system to operate.
The efficiency of the Light bars is measured in lumens per watt. The Lumens per watt is the best indicator of the quality of the light bar. Always go for the light bars with high efficiency that will guarantee you long life and resistance to wear and tear. The capability will also determine how best a light bar will deliver its services to you as a user.
Electric shock is the last thing you can expect from your Jeep. You need to go for waterproof connectors that operate within a wide range of temperature and are sealed by corrosion resistance contacts and silicone. There are two types of electrical conductors made from a thermoplastic with an IP rating of IP67 that you can buy, that is, ATP or DT.
The shape of the Light bar
The shape of a light bar is the primary determinant of how many LEDs t will carry. Depending on the Housing structure of your Jeep, there are round, square or rectangular Jeep Light bars you can choose from. Always go for the round ones since they carry many LEDs in a small area, and they may contribute to design your Jeep Wrangler.
Top 10 Best Jeep Light bars in 2020:
1. YITAMOTOR Jeep Wrangler LED Jeep Light Bar
YITAMOTOR 52" Jeep Wrangler LED Jeep light is worth lighting up your road with the dual-row 27,000 lumens of bright white light, which is suitable of off-road lights for jeep wrangler jk.
With solid construction from the aluminium alloy, YITAMOTOR 52" Jeep Wrangler LED Jeep Light is more durable than its competitors in the market. It is rated on IP67, which makes it water and dust resistant, a factor that guarantees you more durability.
For clear visibility in different terrains, YITAMOTOR 52" Jeep Wrangler LED Jeep light is made in a Combo Beam Design and combines a two 60-degree flood beam and one 30-degree spot beam that is 52 inches. The precise angle of view also makes it easier for you to view and avoid potential road hazards as you drive.
You can use YITAMOTOR 52" Jeep Wrangler LED Jeep light universally as it is compatible with most jeeps including 4×4, trucks, motorcycles, cars. You can also opt to use them as driving lights, fog light and for emergencies since they also work here immensely.
Another thing that will make you buy YITAMOTOR 52" Jeep Wrangler LED Jeep light is that it guarantees you value for money. With a 30-day money refund guarantee in case of any malfunction and a lifetime warranty against any breakdown, you will never regret receiving the lighting services of YITAMOTOR 52" Jeep Wrangler LED Jeep light.
When looking for a jeep light am pretty sure that you are looking for the latest technology in the market and that is what YITAMOTOR 52" Jeep Wrangler LED Jeep lights are. They are designed with the newest design that supports heavy off-road duty for high-intensity lighting. Am sure you will also like the 12V on/off switch wiring that connects and windshield the mounting brackets for your jeep wrangler.
Meet all your off-road night lighting needs with YITAMOTOR 52" Jeep Wrangler light-emitting diode Jeep light.
- Offers extreme bright light
- It's compatible with most jeep wranglers
- It is easy to install
- It is water and dustproof
- Built to last long
- Comes with a lifetime warranty
- Built on a beautiful physical body
- Comes with included spot pods
- Mounting it sometimes require extra bolts
- A loud noise caused by the cooling fan
2. 32000LM Flood Spot Beam Combo White LED Light Bars for Jeep Wrangler
This is a jeep light bars kit that packs Auto feel OSRAM chips 52" and a 22" flood Spot Beam White LED light bars with 32000 lumens, four pieces of 4" LED light pods Combo 6000K that you can use for your Jeep Wrangler Ford Truck Boat.
From the kit, you will find the Adopt OSRAM LED chips which you can be used during the daytime as daytime driving light (DRL). With the illuminating light, you can also make use of adopting OSRAM light-emitting diode chips as signal lights on your Jeep.
The included Spot, and Combo beam light guarantee you a bright and broad view. While driving at night, the gorgeous and expansive view mode keeps you safe as you will have a glossylook of the road evading different road hazards with ease.
When buying any product, you are looking for a long-lasting product that you will not incur replacement costs from time to time. Two things; IP68 and excellent material makes this Jeep light durable as it is water and dustproof. The IP68 rating lets you drive on heavy rains without any worry of damage by rust. The excellent material serves best in electrical conductivity and offers resistance to high temperatures.
Driving takes different directions and angles, and thus you need a Jeep light that can be adjusted with the edge of the drive. This Jeep light serves better here since you can change it in 0/15/90/180 degrees.
The Led light bar Kit packages you a one- 52-inch lightbar, four 4-inch pods and a mouthing bracket that will make it easy during the mounting process.
You will also love to hear of a 3-year warranty of light-emitting diodelight barkit and a lifetime customer support.
- The OSRAM Chips provides bright white light
- Its water and dustproof
- The kit can be used universally in several Jeeps Wranglers
- The pods are easy to install
- The bars make a combo pattern that is acceptable for floodlighting
- Aluminium housing provides a cooling effect
- Relatively inexpensive
- Best for off-road lighting
- The lightbar might not precisely fit 52-inc
3. LEDKINGDOMUS 300W Jeep Light Bar with Mounting Brackets
LEDKINGDOMUS light bar is a Jeep light worth buying. The light forms a COMBO pattern that can add extra supplementary lighting to your Jeep, TJ Wrangler. The auxiliary lights will serve to supplement the leading lights and makes your Jeep Wrangler have a standout look.
When fitting the light on your Jeep, you expect high-intensity light that will aid you in the dark, and this is what LEDKINGDOMUS light bar features.
With an output of 27,000 lumens, it's worth the intensity of light you need. A useful fact here is that you will enjoy the high-intensity lighting for an extended period of over 50,000 hours.
In support of the long operational hours, LEDKINGDOMUS light bar comes with a rugged body construction which is a sturdy build to survive in any tough terrain you go. You can trail the muddiest areas without any fear of damage since LEDKINGDOMUS light bar is made from aluminium housing.
Rust and dust are the main contributors of rendering your light bar less durable, but with the waterproof body of thislight bar, the rust and dirt are kept off. Apart from dust and waterproof, LEDKINGDOMUS light bar is also made to be quakeproof and anti-explosion.
LEDKINGDOMUS light bar is a universal light bar that you can use it for off-road vehicles, on engineering vehicles like bulldozers, trucks, select vehicles like the fire engine. Its different applications give you the reason to buy it. Have in mind that you can use is for camping, boating, as garden lighting, outdoor landscaping, hotels or even in your home.
If you use the Jeep Wrangler TJ designed between the years 1997-2006, the LEDKINGDOMUS 52-inch light bar is much applicable for you.
Once you by the LEDKINGDOMUS light bar package, you get one 300W bar, mounting accessories like wires and mounting brackets that are all compatible with your Jeep Wrangler TJ.
- Super bright
- LEDKINGDOMUS Light bar is durable
- It is made water and dustproof
- Easy to install by just mounting
- Comes with a well-equipped wiring kit
- LEDKINGDOMUS light bar is nicely assembled thus sturdy
- Highly compatible with many Jeep wranglers
- Whistles too loud
- Comes with shorter installation bolts that may not be effective
4. KEENAXIS 126W Spot & Flood Combo Beam Kit LED Light Bar For Driving Fog Lamp Marine Boat
If you want to buy a LED jeep light bar then am sure you would like a universal one. You can use the 12 Inch LED Light bar 240W work light universally on Polaris Golf cart Tractor, the Dodge Jeep Cherokee XJ Ford Ranger, F150 Toyota GMC Nissan and many more Wrangler Jeeps.
You will also find it's super Bright Ray useful as it takes a long radiation distance and a broad view. This light bar combines the spot beam for long irradiation distance, combo beam for clear and excellent visual effect and the flood beam for a comprehensive view. Having this, you can drive off roads confidently.
12-inch LED light bar 240W work light has an excellent and improved heat dissipation. With the enlarged dissipation area by backslidingaluminum sinks, the brightness can be cooled fast, which prevents overheating of the light bars while in operation.
Regular replacements and repair may be costly and may sometimes be inconvenient; that is why you need a work light that is durable like 12-inchlight-emitting diodelight bar 240W work light. With a rigorous and robust quality control process, you are guaranteed over 50,000 working hours, and with the die-cast aluminium body, durability is a guarantee.
When driving, you would need a Jeep light that can be adjusted in different viewing angles. 12-inch LED light bar 240W work light can be adjusted to about 40 degrees that makes it easy to change the driving direction easily.
12 Inch LED light bar 240W work light does not require trained or skilled personnel to fix or install. You only need to locate the already existing holes of the bar and using the screws. You mount it to your Jeep easily.
A pack of 12 Inch LED light bar 240W work light includes one 12-inch, 240W light-emitting diodelight bar, screws, and mounting brackets. With a one-year warranty, you will love this product.
- Low power consumption
- Comes with high lumens chips hence bright
- Operates by Spot Flood Combo Beam
- Has an adjustable bracket for easy installation
- It has a water and dustproof design
- It is long-lasting with 50,000 operating hours
- Comes with a reasonable warranty
- Can be used universally.
- Its mounting screws are not rust resistant
- The mounting screws may snap easily.
5. Rough Country 50" Dual Row LED Jeep Light bar
- Model: Rough Country 50" Dual Row LED Light
- Size: 52.2 x 5.5 x 6.2 inches
- Weight: 20 pounds
- Power: 288W
- Bulb Type: LED
- Warranty: 3 Years
- Brightness: 23040 Lumens
There are no jeep lights that can turn the night dark into the day's brightness than the rough country 50" dual row LED light bar. Using the 23,040 Lumens, and 288W output, this Jeep light will give you amazing and bright lighting even on the darkest point of the night.
For adazzling brightness, rough country 50" dual row LED light bar comes with the moisture breather technology that serves to clear the moisture build-up behind the lens. You can quickly get the bright LED chips working using the on/off switch.
You will love the IP67 rating that guarantees dust and waterproof capabilities. Rough Country 50" Dual Row LED Light bar is also made from the die-cast aluminium casing which not only waterproof but also hard to sustain any stress you may subject it to due to off-road driving.
Another fantastic feature that comes with rough country 50" dual row LED light baris the noise silencer. This feature lets you quickly eliminate hum, whistle and any other noises attached the mounting of this Jeep wrangler light.
Ease of fixing and having it operate without the need of an expert is what you will enjoy too. After buying the rough country, 50" dual row LED light, and you only need to fix it on the ready screw holes on it without any prior knowledge. Above all, there is an installation manual that comes alongside the rough country 50" dual row light-emitting diodelight kit.
Finally, you will enjoy a 3-year warranty with full customer service.
- It Features a noise cancellation feature
- It is water and dustproof, thus suitable for all-weather use
- Easy and quick installation
- Extremely bright light
- It gives a broad light view while driving
- Allows you to adjust to different angles depending on the terrain you are driving in.
- It is built to last long
- The noise cancellation feature does not cancel all the noises
- Relatively expensive
6. Rough Country 30" Black Series Single Row CREE LED Jeep Light Bar
Light up the night darkness with rough country 30" light-emitting diodelightbar. With the powerful 12000 lumens and 150W output. You are assured of a powerful illumination even in the darkest point of the night.
Also, with the spot beam pattern and intense targeted light, you will have a clear driving focus. The breather technology that reduces moisture builds up on the lens, assuring the durability of the lens and a clear view while driving.
Regular repair and replacement of light bars is something you don't like. This light baris built with a die-cast aluminium housing with a single-row aluminium LEDS that makes more durable, lightweight and sturdy. It is coated with black powder, andthe rough country 30" light-emitting light bar is protected against corrosion and any other type of damage. Protection against damage means durability!
The installation process is also a factor that you will love. The installation process of thelight bar requires 2-3 hours to install and get it working altogether. You don't need prior knowledge to connect, follow a simple installation procedure, and get things working. All you need is specific and essential installation tools.
For comfortability and barring noise distractions, rough country 30" LED light bar comes with a noise cancellation feature that counters any form of hum, wind noises and any whistle that may be as a result of the mounting of the LED lights.
Get access to a 3-year unlimited warranty and customer services too. Thus, if you are looking for a light bar, then you need to go for rough country 30" LED light bar.
- Easy to install
- Extended warranty with impressing customer support
- Fitted with a breather technology
- Amazing brightness
- It is weatherproof
- Comes with a toggle switch
- Can be used universally
- It does not come with adjustable viewing angles
- Does not come with included security bolts
7. 42" LED Curved Jeep Light Bar
This lightbar is suitable for off-road trucks, fog JEEP, Polaris Razor, among other wranglers. It perfectly fits your Jeep that will make it look super high.
Apart from the great look, 42" it offers super bright white light that turns the night's darkness into the day's brightness. The brightness is enough to provide you with a secure off-road drive. With the output of super white light of 6000k, this makes 42" LED curved light bar the brightest product in the market.
You must love a durable light bar that does not require regular repair or replacement. With all these, you need to buy this light bar. It is made from an aluminium casing, which is not only weather-resistant but also hard to overcome any stress subjected to it. The LED lights have also been rated to last for over 30000 hours.
Depending on the direction of drive, this light bar allows you to adjust the light beam angles of 60º flood light and 30 º for the spot beam combo. The beam angles will enable you to get a clear focus even on off roads.
Moreover, 42" LED curved light bar comes with a voltage range of 10V to 30V, which allows it to be used universally in all vehicles or any other automobile. The LED power of 240W also supplements the voltage range.
Another factor that will push you to buy this light bar is the ease of installation and getting things working. 42" LED curved light bar comes with the side mounting brackets and a set of mounting screws that you can use to easily and quickly install it on your Jeep. You don't need an expert to fix this light bar.
Also, customer support, a 3-year warranty and a 100% post-sale satisfaction is a guarantee. Within the three years of warranty, you will access free replacements and repairs from experts in case of any.
- Can be used universally for both heavy and light duty equipment
- It is highly durable
- Offers extremely high brightness
- It is water-resistant; IP68
- The package comes with easy to install using mounting brackets
- It has aluminium heat sinks for heat dissipation
- Offers natural white colour Temperature
- Its warranty is long
- Its switch may sometimes be finicky
- The wire harness may not long-lasting
8. Rough Country 70504 LED Bar Upper Windshield 50" Brackets
Most light bars can expertly be installed under the windscreen. If you need to install the light bar on the upper part of the windshield of your Jeep, you need to have some brackets that will aid in installation. Among the best of these brackets is the rough country 70504 LED bar upper windshield 50" brackets.
Rough country 70504 LED bar upper windshield 50" bracket is designed to help fix the light bars that measure 50-5/16 inches from one fixing point to the other. It is suitable for attaching the light bar either on the roof of your Wrangler or between the top of your wrangler's windshield.
It is compatible for both the straight 50-inch dual-row LED and the straight 50-inch single-row LED light bar.
For the safety of your light bar and permanent fixing of the light bar, the rough country 70504 LED bar upper windshield 50" bracket is from a durable and robust aluminium metal coated with black powder.
In case of any damage while in use, be sure of a lifetime warranty that will help you repair the rough country 70504 LED bar upper windshield 50" bracket or replace it when necessary.
- It is easy to install
- It is coated with black powder for durability
- It comes with a lifetime warranty thus no worry over minor damages
- Can fit both Single and Dual Row light bars
- Protects your Jeep Wrangler against tree limbs
- It is super lovely with a low profile
- Cannot be used without a light bar
- The tightening nuts are short and may not fix the light bar correctly
9. Optic Single Row Curved LED Light bar
I am sure you would love a light bar that will conform to the standard wiring of your Jeep Wrangler. You don't need to look further. Get No. 1 31 5D Pro optic single row curved LED light bar, which has a 150-watt pro optic lens, and the CREE 5W high intensity LED that conforms with your Jeep's wiring without a further upgrade.
Do you know what this means? There are no extra costs incurred, you just buy No. 1 31 5D Pro optic single sow curved light-emitting diodelight bar, fix it and get it working.
Of course, a broad view is something that you also need while driving off the road. No. 1 31 5D Pro optic single row curved light-emitting diodelight bar lets you use a COMBO BEAM 60-degree and a 30-degree spot beam.
This means that you can adjust the angle of view while driving in the dark. An extensive and an adjustable view would not say anything without the powerful output lumen of 18,000 and a breather technology that clears mist build-up that ensures that all the right lumens are projected ahead.
With an IP68 rating, it means that the No. 1 31 5D Pro optic single row curved light-emitting diodelight bar it both dust and waterproof. The weatherproof property ensures that there is no rust, which translates to durability. Apart from this property, No. 1 31 5D Pro optic single row curved light-emitting diodelight bar also has a stainless-steel body that cannot rust.
The No. 1 31 5D Pro optic single row, curved light-emitting diodelightbar kit, comes with a free light-emitting diodelightbar rocker, switch kit wire harness, and a sticker park. You only need to pay for No. 1 31 5D Pro optic single row curved light-emitting diodelight and get the whole kit without any extra cost.
You can receive a 2-year warranty and a long-life customer service.
- Super high brightness
- Fitted with breather technology
- IP68 Certified
- Provides a comprehensive adjustable view
- Easy to install
- it Comes with extra switch kit wire harness, sticker pack, and bar rocker.
- Built to last long
- It is curved, thus makes it fit entirely to your Jeep.
- A 2-year warranty may not be sufficient
- Comes with one mounting bracket which may not be enough
10. DOT 52-Inch LED Light Bar Off-road LED Work Lights
- Brand: TURBOSII
- Weight: 27.6 Pounds
- Size: 53.5 x 6.7 x 10.2 inches
- Bulb Type: LED
- Power: 300W, 12V
- Lifetime: 50,000 hours
DOT 52-Inch LED light baroff-roadlight-emitting diode work light comes with a 30-degree spot beam angle and a 60-degree combo beam angle, allowing you to adjust to whatever direction you are driving to.
The beam angles let you have a more comprehensive driving view, which guarantees you a safe off-road drive.
When you buy DOT 52-Inch LED light baroff-road light-emitting diodework lights, you buy a light bar that is durable and long-lasting. It is made of a die-cast aluminum body, PC surface, an iron Bracket that allows it to sustain any exposure to stress and makes it last longer.
A long-lasting light bar means no repair; thus, no extra cost making DOT 52-Inch LED light baroff-road light-emitting diode work lights more convenient.
Mounting and installing is much easy and straightforward. DOT 52-Inch LED light baroff-road light-emitting diode work lights comes with two mounting brackets that let you connect the three lightly directly.
The kit of this light barincludes a 3lead DT connector wiring harness, which consists of a rocker switch, 300W light bar, and three pieces of 18W work light. All these come in one pack with no extra cost!
- It is super bright
- It is built to last long
- It is easy to install
- It comes with its brackets. Thus, no extra costs incurred
- It comes with a breath technology
- It can be used universally on several Jeep Wranglers
- It comes with a rocker switch to enhance wiring
- It is relatively cheap
- It has a limited warranty
- It has no noise cancellation feature.
Jeep Light Bar FAQs
Who Makes the Best Light bar for a Jeep Wrangler?
Although the light bars seem to come in similar functionality and quality, the manufacturers differ. How best a Light bar will serve you mainly depends on your needs, and the type of Jeep wrangler the light bar is made to fit on.
There are different manufacturers of the beam Lights. We have the Daina Electronics Co., Ltd that has been in existence since 1989. Having been in the market for years now and having been ISO 9001:2000 certified; they are the best manufacturers of Light bars, among other electronic gadgets.
How many Lumens is a Good Light bar?
Lumens determine the measure of visible light, which is the brightness of the light bar. Different lighting bulbs have separate lumens that you need to be careful when buying.
An incandescent bulb has 800 lumens which make its efficiency weak, and Compact Fluorescent also has 800 lumens which makes it slightly efficient. A rightlight bar should have about 3000 lumens with 36 watts to give about 80 lumens per watt. The power rating is watts should determine the lumens.
What is Better Between Light bar and Spotlights
Here the light bars carry the day. The light beams provide a more stable beam on the road without vibrations giving a firm and clear view.
The light bars require less or no adjustments even after driving off roads. They did not change their position even with a lot of bumping.
Lastly, light bars present more lighting coverage area due to the arrangement of the continuous LEDs.
How to Choose a Good Light bar?
There are several factors that you can employ when choosing a Light bar. After analyzing the state of your Jeep then you need to consider the beam pattern, the colour of light, size, shape, physical construction, IP rating, connector type and ease of mounting. Some of these factors are discussed above.
How Long do LED Light bars Last?
The life of the LED Light bars majorly depends on how you use them and how often you use them. The standard life of the LED Light bars is between 30,000 and 50,000 hours if you give them proper maintenance.
After reviewing the top 10 best jeep light bars and accessories, you are now able to get the right one that suits you. Different brands of light bars fit on different Jeep Wranglers.
You need to analyze the state requirements and the type of your Jeep before deciding on the light bar you are going for. The position or part the Jeep that you are going to install the light bar will determine the type of light bar you will go for.
Make sure you keep your installed light bars maintained and repaired when necessary to avoid more damage to them and your Jeep too. Always read the user manual before getting the light bar installed to your Jeep. That will ensure you install the Light bar accordingly, which in return will ensure your safety and the safety of your Jeep too.