How to Install A Bathtub on Concrete Floor

Bathroom remodeling is interesting. You may thinking of install a new bathtub or replace older one. We will equip you on the right way.

A floor made of concrete or cement, bathtub installation requires special care. Having a new air bathtub not only brings a refresh feeling but also gives the bathroom interior a beautiful look.

Materials required:

  • Notched trowel
  • Cordless drill
  • Leveling compound
  • Screw bits
  • Rubber mallet
  • Drywall screws
  • Two by four block of wood
  • Tub drain with your favorite color
  • Plunger
  • Threading rods

How to Install An Acrylic or Fiberglass Bathtub on A Concrete Floor:

#Step 1: Choose a Spray Area

Choose an appropriate area near your bathroom wall that will cushion water splash as you bathe in the tub. Ensure that the spray area you've chosen is splash-proof. Professionally apply a unique sealing material to make your wall waterproof.

However, to ensure that the sealing material sticks well, make sure that the wall gets appropriately cleaned.

#Step 2: Level Your Bathroom Floor

If your bathroom floor is uneven, it is necessary to apply a coating on the space where you will set up your tub. First, inspect where you will put up your bathtub to find where unevenness is. Once this gets done, apply the sealing compound on the surface using a notched trowel.

#Step 3: Put Up the New Bathtub

Once you have leveled the tub area, place your bathtub tank right where it's supposed to sit. If you had an old tub removed, it would help set the new container on the existing drain plumbing area. Put the tub slowly to ensure that the tub's weight doesn't damage the plumbing drain.

#Step 4: Properly Place the Bathtub

You are on the right track! Level the bathtub on the floor slowly and ensure that all corners get evenly placed. To ensure that the tub is in its proper place, use a rubber mallet and a short piece of wood measuring two by 4 inches. As you level the container, make sure that the mallet-hammer and the part of wood slowly fall into the already leveled surface.

#Step 5: Screw Up Your Tub

Screw the flange of your bathtub using drywall screws and a cordless drill. As you walk around the tub flange, ensure that screws get installed after every 6 inches. Tighten the screws properly on the studs of the wall.

#Step 6: Put in a Threaded Drain

Carefully insert the threading pipe right through the male thread and into the bottom of the drain hole. The thread ought to stick-up next to your bathtub. Don't worry; the process is effortless.

#Step 7: Put Up Overflow Components

You've got almost done! Securely insert the linkage, plunge, and an overflow rod through the hole of your bathtub. After this, level up your tub with an overflow drain hole. Lastly, tighten up the components with screws.

#Step 8: Insert the Spout Pipe

Have a new tub spout pipe and insert it carefully through the spout hole. Make sure that the spout hole reaches the elbow of the wall. To fasten the threading spout, use a pair of pliers. However, if you purchased a copper pipe, you don't have to do anything since it comes preinstalled.

#Step 9: Test Your Bathtub

You are about to finish putting up your bathtub in the concrete basement. Fill up your tub with water to ensure that the stopper and the overflow drain are working perfectly well. Moreover, check the crews on your container to ensure that they get tightened up appropriately.

Which Ones Are the Available Models of Bathtubs?

Are you confused about which model to choose for your home? Tubs come in different models and sizes. Before you purchase one, it is essential to have bright ideas on which type best fits your needs and your house. Here are available models to select your tub:

  • Corner tubs

It is a tub professionally equipped with a wide range of accessories and toiletries. However, it is a type of tub that takes lots of space and is suitable for large bathroom spaces.

  • Rectangular tubs

Dimensions of these tubs vary from 1.4 to 1.8 meters in length, with only two widths. In this case, they are either 70 or 80 centimeters. Besides, these claw foot tubs are most common because of their low price range.

  • Circular tubs

It is a spectacular tub, not standard in most homes because they are quite expensive and occupy lots of space. Its design is suitable for a large bathroom and usually gets situated in the center of the room. Also known as freestanding bathtub, it brings a charming look at any bathroom even on concrete floor bathroom.

Are you now happy? You got now set to use your bathtub! Enjoy the refreshing moments that come with having a new tub.

Final Thoughts

Most people tend to think that installing a bathtub on a concrete floor is a hard task. It is not the case. It's simpler than you think. With our detailed guidelines, your work gets more comfortable. So, put up a new bathtub to your concrete floor today by following our instructions, and you won't get disappointed.

Scroll to Top